
 |
DP20B Stand Alone Power
The DP20B is a small
battery-backed desktop telecommunications power supply that provides power for up to three NT1's and six multipoint
ISDN telephones. It supplies 48 VDC and supports a twenty watt load. The built-in battery provides up to four hours of holdover
time. The DP20B has three eight way telephone jacks on the rear panel, and allows powering of both the NT1 and the terminal equipment at either the
U interface or the S/T interface.
The DP20B-E ("Extender" version) adds an RJ45 punchdown block and mounting plate that is pre-wired for multiple NT1's. In addition,
the Extender acts as a splitter to allow a single four pair wire to be split into three separate lines from its distribution block. This feature
can be used to provide fast frame video with three BRI lines. The DP20B-E can be operated on the desktop or mounted to the wall.
For applications not requiring battery backup, the 1215B wall mount power supply provides an economical solution for one NT1 and two phones.
| Ordering Information |
| MODEL # |
DESCRIPTION |
DIMENSIONS
(W"xD"xH") |
| DP20B |
Stand alone power supply and 4 hour battery for 1 NT1 and 2 phones
|
5.5 x 7.5 x 2 |
| DP20BE |
Stand alone power supply and 2 hour battery for 3 NT1's and 6 phones
|
7 x 14 x 4 |
| Technical Specifications |
| ELECTRICAL |
- Input Voltage 85-132 VAC
- Frequency 45-440 Hz
- Output Voltage 48VDC (+/- 5%)
|
| |
| ENVIRONMENTAL |
- Temperature: -20° C to +40°C
- Humidity: 95% non-condensing
- Optimum battery life will be achieved if the unit is operated at a temperature of 25° C.
|
| |
| NT1 COMPATABILITY |
|
|
| |
| STANDARDS |
|
|
|
|
|

For order information or technical support contact us at
>> 800-765-4734 |
|