SEI Telephony Products : ISDN Premises Power : PoweRack Series : PoweRack 96e

>	NT1's
	• P230 • B300

>	PoweRack SERIES
	• PR300e • PR230e • PR96e

>	DP SERIES
	• DP140e • DP240e • DP700e

>	1145 REPLACEMENTS
	• S1145B Battery Pack • S1145R Power Unit

>	BATTERY PACKS
	• BP-8U • High Capacity Batteries • Battery Replacement Program

>	STAND ALONE
	• DP20B • DP20B-E • 1215B

>	ISDN DISTR. BAYS
	• PDP30 • DM500

PoweRack Series

PoweRack 96e

A Hi-density powering unit that integrates NT1 caging, 48 volt DC power, and battery backup in a single pre-assembled unit for powering telephones and SEI/Lucent P230 circuit card NT1's. The PR96e will house and power up to 48 P230 NT1's and provide power for up to 96 multipoint phones. The system controller protects the batteries from over-discharge via a low voltage disconnect circuit. It performs an automatic battery test and indicates when the battery needs to be replaced. The battery is replaceable without taking the phones out of service. Remote monitoring is provided via a relay contact closure.

PoweRack 96e

The PR96e output distribution is through standard 50-pin Amphenol connectors. Battery holdover can be extended by adding external BP-8U battery packs or High Capacity Battery Cabinets. All PR96e units are mountable either on a wall or on 19" racks.

When NT1's are purchased with a PoweRack 96, SEI will install and individually test each NT1, providing the customer with a fully configured solution suitable for immediate installation.

Ordering Information
MODEL #	DESCRIPTION	DIMENSIONS (W"xD"xH")
PR96e-8	PoweRack with 1 hour battery for 48 P230 NT1's and 96 phones	19 x 8 x 19
MODEL #	EXPANSION ACCESSORIES	DIMENSIONS (W"xD"xH")
BP-8U	8 amp hour external battery pack	19 x 5 x 6.25
BP-CAB	High capacity battery cabinet for up tp 8 hours of battery holdover	Call

Detailed Technical Specifications

For order information or technical support contact us at
>> 800-765-4734


>	RELATED FILES

	Online Powering Guide A complete technical overview of ISDN premises powering.
	PR96e Product Information Sheet
	PR96e Installation and Operations Manual
	Power Supply Adjustment Procedure